Spek is a free, open-source spectrum analyser for Windows, macOS and Linux. You open an audio file and it draws a spectrogram: time from left to right, frequency from bottom to top, and loudness as colour. Music fans use it to check whether a FLAC was really ripped from a lossless source or converted from an MP3.
The SoundBench Quality Analyzer draws the same kind of spectrogram in the browser and also measures the cutoff frequency for you, so you get a verdict without having to judge the picture by eye. The file is decoded on your device and never uploaded.
How to read the spectrogram
- Look at the top edge of the coloured area. That is the highest frequency present in the file.
- A genuine CD rip usually has content reaching 20 to 22 kHz that rises and falls with the music.
- A transcode has a straight, flat ceiling across the whole track, often with a sharp cliff at a typical encoder frequency.
- Quiet passages and fade-outs are less useful. Judge the loud, busy parts of the song.
Typical cutoffs to look for
| Where the ceiling is | Likely source |
|---|---|
| ≈ 11 kHz | Very low-bitrate MP3 or audio from an old video |
| ≈ 16 kHz | MP3 128 kbps |
| ≈ 18–19 kHz | MP3 192 kbps |
| ≈ 19.5–20 kHz | MP3 320 kbps or AAC 256 kbps |
| ≈ 20–22 kHz, uneven | Likely genuine CD-quality lossless |
Spek and SoundBench compared
| Spek | SoundBench Quality Analyzer | |
|---|---|---|
| Install | Desktop app | Nothing, runs in the browser |
| Works on phones | No | Yes |
| Spectrogram | Yes | Yes |
| Automatic verdict and cutoff value | No, you read the picture | Yes |
| Fake hi-res check (24-bit, 96 kHz) | Visual only | Reports bit depth and sample-rate content |
| Batch of many files | One at a time | One at a time |
| Uploads your file | No | No |
Check a file in three steps
- Open the Quality Analyzer and drop a FLAC, WAV, ALAC or AIFF file onto the page.
- Read the verdict and the detected cutoff frequency.
- Check the spectrogram over time to confirm: a flat ceiling from start to finish is the fingerprint of a transcode.
Frequently asked questions
Is Spek still a good tool?
Yes. It is free, fast and accurate. A browser tool is useful when you are on a computer where you cannot install software, on a phone, or when you want the cutoff measured for you.
Can a 320 kbps transcode fool the check?
It is the hardest case, because the cutoff sits near 20 kHz. Look for a perfectly straight shelf there across the whole song, where real recordings usually vary.
Does a low cutoff always mean fake?
No. Old tapes, some live recordings and dark-sounding masters can have little high-frequency content. A gentle, uneven roll-off is natural; a straight brick wall at a typical encoder frequency is the warning sign.
Related tools
Quality Analyzer
Spot fake lossless files and see the spectrum.
How to Tell if a FLAC File Is Really Lossless
Spot FLAC and WAV files that were made from MP3s.
How to Check FLAC File Integrity
Find corrupted FLAC files, and tell them apart from fake ones.
Audio Bitrate Explained: Which Bitrate Should You Use?
Which bitrate to pick for music, voice and video.